Protocollen
___________
UDP:
-> Connectionless | Limit Error checking | Best-effort delivery | no data recovery
TCP:
-> Connetion Oriented | Full Duplex mode operation | Error checking | Sequencing data packets |
Acknowledgement of receipt | Data recovery
RIP:
-> Routing IP protocol (Distance vector protocol)
-> Kijkt de route op basis van hops
-> per 30 seconden een broadcast van de bekend zijnde netwerken (veel broadcast)
RIP V1:
-> Broadcast | Classfull | No VLMS | Auto Summary | NO Authentication | Send no mask |
RIP V2:
-> Multicast | Classless | VLMS | No Auto summary | Authentication | Send mask |
STP:
-> Spanning Tree Protocol
OSPF:
-> Routing protocol (Link state routing protocol)
-> Open Shortes Path First
-> Kijkt route op basis van cost (de bandbreedte)
-> Gebruikt het Dijkstra algoritme
EIGRP:
-> Enhanced Interior Gateway Routing Protocol (ontwikkeld door Cisco)
-> Zal bij meerdere routing protocolen de voorkeur krijgen afhankelijk van de Administrator distance)
-> Maakt gebruik van zowel het Link-state routing als van het Distance vector protocol
IS-IS:
-> Routing protocol (link-state protocol)
Spanning tree:
-> protocol voorkomt loopt (broadcast storm) op switch (als redundancy is uitgevoerd)
ARP:
-> Adress Resiolution Protocol (is een broadcast)
CDP:
-> Cisco Discovery Protocol (Discover de Cisco neighbors -> als laag 1 + 2 OK zijn werkt CDP)
802.1x:
-> Authentication protocol
HDLC:
-> Laag 2 protocol
PPP:
-> Point to point Laag 2 protocol
Frame Relay:
-> Laag 2 protocol
ATM:
-> Laag 2 protocol